Buick Grand National
Used Parts & Sales
:: Browse By Vendor
See Entire Catalog
Home » MAIN PARTS LISTING -- CLICK HERE » Cylinder Heads & Air Intake » Cylinder Heads & Valvetrain
Special Machining Features Include: CNC machined 46cc combustion chambers are the same shape and volume on every head. Intake and exhaust port openings and bowls are consistently machined as a guide to the final professional hand polishing for maximum flow and power. Precision milled finish on intake, exhaust, and valve cover gasket surfaces. Machined clearance on rocker pedestals to clear aftermarket T&D shaft rocker assemblies Precision milled deck surface for proper head gasket seal and to adjust combustion chamber volume.
Additional Features: Valve Guides upgraded with K-line bronze liners precision honed to the correct valve stem to guide clearance. Guides machined to accept Teflon valve stem seals. Valve Seats contour machined on a Newen II CNC valve seat machining center Multi angle valve seats with superior geometry, concentricity, and surface finish. Consistent depth and profile of valve seats not possible on manual machines.
Complete assemblies include quality parts: Manley one-piece severe duty intake and exhaust valves. New valve springs Chrome Moly spring retainers. Hardened valve locks. New freeze plugs Hydraulic roller springs available upon request. Final assembly is performed by qualified technicians with special attention to detail. All valve springs are set up for a hydraulic cam with a maximum lift of .500". Valve Springs are installed at a height of 1.75" yielding a closed pressure of 100 lbs.
« Previous | Next »