:: Forums 
 ::
About us
 :: Customer Cars
 :: Contact us


 :: Buick Grand National
 :: Used Parts & Sales
 ::
Browse By Vendor
 :: See Entire Catalog


 
 Cottons Performance Center
 105 Walnut St.
 Agawam, MA 01001
 Ph:  (413) 789-0531
 Fx:  (413) 789-0401
 Email Us

 


 


Home » MAIN PARTS LISTING -- CLICK HERE » Cylinder Heads & Air Intake » All Products

 Checkout
 
Product ID: 103
Spark Plugs for GN1 Aluminum Heads
 
Autolite spark plugs we use in the Champion GN1 14-bolt aluminum heads. Set of 6
Price: $24.00

 
Product ID: 217-437
Idle Air Control Sensor
 
AC Delco Idle Air Control Sensor
Price: $79.99

Plenum Gasket
Product ID: 24502

Details 

Upper intake gasket for stock style plenums

Price: $4.00

Vacuum Block, stock
Product ID: 6796-Buick

Details 

This aluminum vacuum block is bolted to the top of the throttle body on the 1986-1987 Turbo Regals.
Price: $44.95

Vacuum Block w/ fitting
Product ID: 6797-Buick

Details 

w/ extra vacuum fitting for vacuum brakes

 The vacuum block is bolted to the top of the throttle body on the 1986-1987 Turbo Regals.

Price: $49.95

Valve Cover Breather Tank
Product ID: 85465

Details 

We offer the best way to keep oil from flowing off your valve covers and onto your exhaust to prevent any embarrassing smoking while cruising down the street...

 NOTE: Price is per tank. We also carry all fittings and braided hose to make this kit complete. Call for pricing!

Price: $89.95

Head Bolt Kit, Iron Head
Product ID: ARP123-3703

Details 

ARP Head bolts and washers for stock and Champion Iron Head, 12pt
Price: $49.00

 
Product ID: ARP123-4203
Head Stud Kit, Iron Head
 

ARP 12pt Head Studs for stock and Champion Iron Heads

Price: $129.00

Head Bolt Kit, Iron Head
Product ID: ARP223-3703

Details 

ARP High Performance Pro Series 12 pt Head Bolts for stock and Champion Iron Heads

Price: $99.95

Head Stud Kit, Champion GN1
Product ID: ARP223-4204
Head Stud Kit, Champion GN1
 
ARP Head Studs for the Champion GN1 Aluminum heads
Price: $109.00

Intake Manifold Bolt Kit
Product ID: ARP423-2001

Details 

ARP lower intake manifold stainless hex head bolts and washers
Price: $49.00

Accufab 70mm Throttlebody
Product ID: B70

Details 

Accufab's 70mm throttle bodys are CNC machined from high quality billet aluminum and then polished to a mirror finish.  Each is hand assembled with the finest brass, stainless steel and other top quality component parts.

Includes one throttle body gasket and screws to mount to your plenum

Price: $319.00

Valve Cover Breather, 1"
Product ID: BR1170

Details 

K&N crankcase vent filters have a one piece design with a chrome top and a vent tube added to the base. Filters can be pressed into rubber grommets in valve covers for direct mounting. All base plates are chrome plated. Fits Champion valve covers. Grommets not included.

Note: Will not fit stock valve covers

 Sold separately so please adjust quantity as needed..

Price: $24.95

Valve Cover Breather w/ shield
Product ID: BR1516

Details 

K&N crankcase vent filters are designed for racing but are sporty enough for show cars. Shield and top plate are chrome-plated for beauty and durability. Universal “Push-In” one-piece filter and grommet for Champion and all valve covers with 1 1/4" hole.

Note: Will not fit stock valve covers

Sold separately so please adjust quantity as needed..

Price: $21.99

Breather By-Pass Kit
Product ID: BR1580-Buick
Breather By-Pass Kit
 
This kit consists of a passenger’s side breather with a chrome-plated cap and a rubber plug to close off the turbo inlet bell. Many of these turbo cars are getting oil into the intercooler which, in turn, causes the hose connections to loosen up on the inlet pipe. If this problem is allowed to continue, it will gum up the throttle body and cause your turbo to run rough. This breather eliminates that pipe and the danger of oil going through your system. The metal top isn’t affected by the heat of the turbo. Nothing else to buy. You can easily return your car to stock.

NOTE: This breather by-pass kit may not be legal for sale or use on pollution controlled vehicles in California and other states.
Price: $19.95

EGR Block Off Plate
Product ID: CRH-B1201
EGR Block Off Plate
 
Price: $19.95

Valve Cover Adapter for Oil-Catch Can
Product ID: ENG121

Details 

Cotton's very own billet aluminum valve cover adapters that fit into your aftermarket 1" i.d. breather grommet to allow -12AN female fittings for an oil catch can set-up. No welding, no headaches. Grommets not included.

 Sold separately so please adjust quantity as needed..

Price: $21.00

Valve Cover Angle Adapter for Push-In Breather
Product ID: ENG122

Details 

Cotton's very own billet aluminum angled breather adapters that fit into your aftermarket 1" i.d. breather grommet to allow 1" i.d. push-in style breathers.

 Sold separately so please adjust quantity as needed..

Price: $25.00

IACV Angle Boss, Champion
Product ID: ENG133

Details 

Designed by Champion Racing Heads this item solves clearance problems involving wiring harness connection to the IAC valve when running non-stock turbos with large inlet tubes. The Champion IAC valve adapter indexes the IAC valve 45 degrees in relation to the throttle body. This allows easy access for wiring harness connection.

Price: $69.95
Out of Stock

IACV Angled Housing
Product ID: ENG134

Details 

Replace that crummy looking idle air control valve housing and angle your IAC to make room for bigger intakes at the same time with Cotton's polished aluminum IAC angled housing. Comes with gasket and hardware.
List Price: $79.95
Price: $79.95

« Previous | 1 | 2 | 3 | »


 
Current Specials!


Shop Online Now! We Proudly Accept
 
 


Directions To Cottons Performance Center


Shipping & Return Information



Jack Cotton's 8.90 @ 154MPH 1986 Buick
 T-Type