Header Studs, External 12-Point, Steel, Black Oxide, Set of 12 w/ washers

For use with Turbonetic's Evolution 38mm Wastegate

 All our downpipes are made from aluminized-steel and come with the necessary hardware to bolt it up to the turbo.

Felpro Turbo Mounting Set includes:

• 1 Turbo Inlet
• 1 Turbo Exhaust
• 1 Oil-Drain Connector
• 1 Retainer Adapter Connector Seal
• 2 Oil Cooler Adapter to oil pump cover

This dual 2.5" stainless-steel exhaust system, comes with everything needed from the back of the cat to the tip of the tailpipes, mandrel bent with SS Magnaflow mufflers with all necessary mounting hardware. Mufflers will now be located in front of the axle with tail pipes exiting in the stock location. If using the stock trans located hanger, mild mods to the hanger may be necessary. This is one of the quietest systems available and is a Cotton's exclusive system. Mufflers come with a limited lifetime warranty.

     *** all exhaust system will cost a minimum of $35.00 plus shipping to most US locations***

Tial 38mm External Wastegate has been proven to work reliably from medium to high power setups. The Tial 38mm wastegate bolt pattern is compatible with Turbonetics Deltagate style flanges.

• 347 stainless steel alloy for valve and housing
• High temperature silicone Nomex reinforced diaphram
• Stainless steel actuator spring for consistent pressure/force
• Nitronic stainless steel for valve seat and valve bushing
• Includes higher level gates and hardware and fittings

The HP Newgen was built to withstand the enormous back pressures that can occur when boost is the only way to more power. This is especially true when maximum compressor wheel sizes are enforced for certain racing classes. The HP Newgen is built with even more bomb proof components to ensure accurate boost control at the highest pressure ratios.

 Horsepower Rating: 1000hp (30psi+)